| Surname* | |
| First Name* | |
| Mailing Address* | |
| Company Name* | |
| Department Name | |
| Position | |
| Phone Number * | |
| FAX Number | |
| Postal code | 〒 |
| Prefectures | |
| City | |
| Street address etc. | |
| Measurement conditions: desired size | ● Sample standard size φ10mm thickness = 1mm (Sample is a thin cylinder.)
Please fill in if you have any request other than the above sizes.
|
| Measurement conditions: shrinkage measurement or stress measurement | |
| Measurement conditions: curing conditions | |
| Measurement conditions: curing conditions / others | Please fill in only those who checked [UV + Heat Curing / Others] above.
|
| Measurement conditions: UV irradiation conditions | |
| Measurement conditions: Illuminance | mW/c㎡ |
| Measurement conditions: Irradiation time | sec |
| Measurement conditions: Integrated light intensity | mJ / c㎡
● Heating conditions (MAX 200 ℃) * The temperature raising / lowering speed is up to 10 ℃ / min. |
| Initial temperature = 25 ° C |
| Measurement conditions: time before heating | min |
| Measurement conditions: heating temperature (1) | ℃ |
| Measurement conditions: heating rate (1) | 1 / min |
| Measurement conditions: Holding time (1) | min |
| Measurement conditions: heating temperature (2) | ℃ |
| Measurement conditions: heating rate (2) | ℃/min |
| Measurement conditions: Holding time (2) | min |
| Measurement conditions: heating temperature (3) | ℃ |
| Measurement conditions: heating rate (3) | ℃/min |
| Measurement conditions: Holding time (3) | min |
| Measurement conditions: cooling rate | ℃ / mi |
| Measurement conditions: Measurement end temperature | ℃ |
| Measurement conditions: Number of measurements (n number) |
* Depending on the number of times, the actual measurement time will be charged. |
| Measurement conditions: other comments | |
| Q: How did you learn about our website? | |
| Q: If you checked the introduction, please tell me the introducer. | |
| 見込み客のデータ元 | |
|
